First-timer's Guide to Installing a New Shower Unit

Call Today

Nearly everybody may have their own thinking involving Simple ways to Install a Shower Cubicle on Your Own.

An effective shower installment calls for cautious preparation and also a lot of work. For the most part, you will certainly need to do 3 kinds of tasks: mounting walls, mounting the plumbing, and also finishing wall surfaces.

Different Types of Shower Units

Push-on Mixer: The hose pipe and spray parts of the push-on mixer shower system can be connected to the bathroom faucet based on your requirement, as well as the water temperature can be changed by means of the taps. Push-on mixers are cheap as well as exceptionally simple to mount. Nonetheless, although the pipe connection is straightforward, it is conveniently removed. Furthermore, it is troublesome to readjust the temperature.

Bath/Shower Mixer: The hose and also spray of this type of shower are integrated with a bathroom mixer tap, and also the temperature can be readjusted through the bathroom taps. It is a really affordable option and also no additional plumbing is involved. Nevertheless, the bath/shower mixers additionally suffer from inconvenient temperature control choices.

Handbook Mixer: The pipe as well as spray of a hands-on mixer shower system are a part of the wall system as well as the hot and cold water supplies are attached to a solitary valve The temperature and also pressure of the water are controlled via either one or a selection of knobs (in much more expensive showers). Although temperature control is much easier in hands-on mixer types, they are a lot more costly than the previously discussed mixers. They also require extra plumbing of hot and cold water pipes.

Thermostatic Mixer: The tube and spray of this shower type belong of the wall unit and also the cold and hot water products are connected to a single valve here also. It is full with an integrated stabiliser to self-adjust the water temperature and to stop it from ending up being as well warm. One of the greatest advantages of a thermostatic mixer shower type consists of hassle-free temperature control. Nonetheless, it is the most costly of the various mixer choices.

Power Shower: A power shower is a solitary system containing a powerful electrical pump that is capable of changing both the water stress and temperature. This sort of shower can be fitted if there is water system from a cold water tank and a hot water cylinder. A power shower makes the change of both stress and temperature simple. On the other hand, it disagrees for water warmed straight by the shower or where the water is provided by a mix central heating boiler under mains pressure.

Electric Shower: An electrical shower is plumbed right into a keys cold water supply and also it warms the water electrically. It is important to note that for this shower kind to be mounted, the keys stress needs to be at least 0.7 kg/sq cm (10lb/sq in). The unit allows the temperature as well as pressure to be readjusted using a knob. Designs with temperature stabilisers are much better as they stay unaffected by other faucets in other places being used within the family. A significant disadvantage of electrical showers is that the control knob just permits the option of heats at much less stress, or reduced temperatures at a better stress. This is troublesome in the winter when the spray is usually weak and also the mains water is cooler. Nevertheless, this problem is taken on in some versions which are offered with a winter/summer setup.

Many Typical Blunders

Violating or disregarding regional code constraints.

Using pipes that are too small.

Connecting copper to galvanized without utilizing a brass or dielectric fitting between the two.

Not utilizing tape or pipe compound at threaded joints.

Uneven your components when mounting them.

Not setting up an air gap filling for components.

Reducing supply stub outs as well short to set up the shutoff valves onto after the completed wall is in place.

Not correctly lining up tubing right into installations or stop shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing goes to an angle will create a leakage.).

When turning the water back on in your house, always run the outdoors hose pipe shutoff or purge your commodes to hemorrhage dirt and also air from the lines. This debris can cause problems in your sink taps as well as various other plumbing trim.

Preparation.

To start with, you must decide on the sort of shower that you desire to set up. It is necessary to establish whether the chosen shower is capable of managing certain systems and can manage a secure degree of water through the boiler. Most shower systems nowadays are created to be flexible to various water stress (such as saved warm water and cold mains).
It is additionally essential to consider the water pressure and the preparation of the piping and water drainage for the shower.

Method.

Depending on the sort of shower you wish to set up, the shower head must either be suited order to prevent its contact with the water in the bath listed below or the base tray, or it needs to have a check valve.
Prior to starting, it is advisable to note the settings of the shower head and also control, and to intend the pipe-work included. Additionally, the drain system to remove the waste water will certainly need to be prepared. Both positions of the cord course and the shower button will certainly also need to be taken into consideration if an instant or electrical shower device is being installed.
Use the direction guide supplied with the shower device to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is essential to cut off the water. In order to safeguard the pipelines, they must be given a water resistant covering and additionally fitted with separating shutoffs. The pipelines can after that be hidden into the wall as well as glued over to neaten the general look.
Fit the base tray, shower head, as well as fittings.
Link the major shower control to the pipes that will certainly be providing the water (This might require a women screw thread adapter).
Reconnect the water supply and test the pipes for any type of leaks, as some might require tightening up.
If you are installing an electrical shower, bear in mind to turn off the electricity supply before making any kind of electric connections. When these links have actually been made (there should be guidance within the user's manual), the power supply can be switched back on.

Adjusting Water Pressure to Fit Your Shower.

The cold water tank can be lifted to a greater elevation (often as little as 150mm (6inches)) by fitting a strong wood assistance under it - potentially made up of struts and also blockboards. If you pick this option, the main and distribution pipes will also need to be elevated to fulfill the brand-new elevation of the tank.
Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is picked, it needs to be connected into the power supply in order to run.

Piping and Drainage.

It is best to utilize 15mm size supply pipelines, and also make the runs to the shower as short and straight as feasible so as to maintain maximum stress and reduce warm loss. Furthermore, by minimising the use of joints for pipe corners, you can lower the resistance in the flow of the water. You can achieve this by flexing the pipes rather.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I'm very involved in How to Install a Direct-to-Stud Shower Enclosure and I am assuming you appreciated our post. If you please take the time to distribute this blog if you liked it. I enjoy reading our article about How to Install a Shower Enclosure .

Explore Now